以物为媒:从技术哲学的“物转向”看思辨与批判性设计的伦理潜能

在新兴技术逐渐成为社会发展取向重要因素的时代语境中,结合技术哲学"物转向"的特点,从思辨与批判性设计(SCD)的认识论基础、智识来源入手,理解SCD以物为媒的伦理潜能。与传统设计伦理不同,SCD将抽象的技术前景置于日常生活中并予以具象化,将未知的技术未来予以视觉化虚构,从而将技术讨论从专家拓展到大众。SCD作为一种前瞻性的批评策略,以具体的物而非抽象的语言为媒介,对技术可能造成的负面影响进行具体的、就事论事的讨论。在技术哲学进入"物转向"的当下,SCD以物为媒,呈现出"前瞻性""建构性""经验性"的伦理潜能。     

单自由度八杆仿生机构构型与尺度同步设计方法

单自由度八杆仿生机构杆长参数较多，是仿生机器人领域研究的难点之一。为提高设计效率，提出一种构型与尺度同步设计方法。在选定的运动链和机架的基础上，以不等式形式分步给出运动可行性及外形约束条件，使得上一步的杆长可作为下一步求解的已知值。通过该过程，在得到八杆仿生机构构型的同时，快速得到所有杆长的初步可行域。循环上述过程，逐步缩小约束条件的范围，可使得八杆机构的杆长快速接近目标值。在此基础上，分类讨论了连杆搭接顺序、约束条件及基本运动链的差异对求解难度及构型结果的影响。利用所提出的单自由度八杆仿生机构的设计方法，在对初始条件进行合理选取的前提下，可在初步得到构型的同时将杆长限定在较小范围内，实现了构型与尺度的同步设计。该方法还可应用于其他单自由度机构的设计当中，具有较好的借鉴意义。     

镀液温度实时控制系统的设计与实现

针对镀液温度变化的非线性和滞后性,设计了采用专家规则的镀液温度实时控制系统。该系统在实时监测的基础上,构建了综合评判镀液温度偏差和镀液温度偏差变化率的专家规则,实现了镀液温度的自适应快速调节。仿真分析结果表明,该系统克服了非线性和滞后性的不良影响,能够实现镀液温度的实时控制。     

露天爆破智能设计系统开发及应用

为了提高露天台阶爆破设计的规范化、便捷性，对露天台阶爆破设计系统进行了开发研究。以Visual C++为开发平台，软件采用MFC框架，结合OpenGL三维引擎开发技术，实现软件从底层自主开发生态的建立。通过现场工程实践应用表明爆破设计人员可以轻松通过本系统实现三维环境下的布孔设计和爆破网络设计以及精确的GPS布孔，并取得了良好的爆破效果，提高了台阶爆破的设计质量和设计速度。爆破智能设计系统能够实现矿山爆破设计的数字化、科学化、自动化和高效化，对于露天爆破具有十分重要的意义。     

Design structure matrix (DSM) method application to issue of modeling and analyzing the fault tree of a wind energy asset

The perpetual energy production of a wind farm could be accomplished (under proper weather conditions) if no failures occurred. But even the best possible design, manufacturing, and maintenance of a system cannot eliminate the failure possibility. In order to understand and minimize the system failures, the most crucial components of the wind turbines, which are prone to failures, should be identified. Moreover, it is essential to determine and classify the criticality of the system failures according to the impact of these failure events on wind turbine safety. The present study is processing the failure data from a wind farm and uses the Fault Tree Analysis as a baseline for applying the Design Structure Matrix technique to reveal the failure and risk interactions between wind turbine subsystems. Based on the analysis performed and by introducing new importance measures, the “readiness to fail” of a subsystem in conjunction with the “failure riskiness” can determine the “failure criticality.” The value of the failure criticality can define the frame within which interventions could be done. The arising interventions could be applied either to the whole system or could be focused in specified pairs of wind turbine subsystems. In conclusion, the method analyzed in the present research can be effectively applied by the wind turbine manufacturers and the wind farm operators as an operation framework, which can lead to a limited (as possible) design‐out maintenance cost, failures' minimization, and safety maximization for the whole wind turbine system.     

浅谈桥梁深基坑挡土墙防护施工方案

本文根据该项工程实际情况和相关技术标准、水文地质特征,对施工准备、测量放线、基坑开挖、挡土墙施工、基坑监测等关键部分进行深入研究。     

单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。     

从中西色彩观差异看中西方设计色彩的异与同

目的对中西方设计色彩差异进行理论分析。方法以中西色彩表达的文化差异为基础,通过对中西方色彩观的文化渊源进行比较分析,提炼出对中西传统色彩观的文化特点概括。结论通过对色彩在中西方建筑、服饰、装饰等设计中的运用案例进行分析,把握传统色彩观在历史空间中的演进与中西融合趋势,以求对21世纪全球语境下的现代设计色彩发展,提供基于中西传统色彩观特点比较分析基础上的把握。     

Kinetic,thermodynamic parameters and in vitro digestion of tannase from Aspergillus tamarii URM 7115

Tannase is an enzyme used in various industries and produced by a large number of microorganisms. The aim of this study was to evaluate tannase production to determine the biochemical, kinetic, and thermodynamic properties and to simulate tannase in vitro digestion. The tannase-producing fungal strain was isolated from “jamun” leaves and identified as Aspergillus tamarii. Temperature at 26°C for 67?h was the best combination for maximum tannase activity (6.35-fold; initial activity in Plackett–Burman design—15.53?U/mL and average final activity in Doehlert design—98.68?U/mL). The crude extract of tannase was optimally active at 40°C, pH 5.5 and 6.5. Moreover, tannase was stimulated by Na⁺, Ca²⁺, Mg²⁺, and Mn²⁺. The half-life at 40°C lasted 247.55?min. The free energy of Gibbs, enthalpy, and entropy, at 40°C, was 81.47, 16.85, and ?0.21?kJ/mol?·?K, respectively. After total digestion, 123.95% of the original activity was retained. Results suggested that tannase from A. tamarii URM 7115 is an enzyme of interest for industrial applications, such as gallic acid production, additive for feed industry, and for beverage manufacturing, due to its catalytic and thermodynamic properties.     

考虑行走弹性影响下的车辆换挡过程分析

为研究行走弹性对工程车辆行走换挡过程的影响，建立了考虑驱动轮轮胎变形引起的车辆行走弹性影响的整车行走动力学模型，该模型适用于换挡过程分析。计算与分析了典型装载机动力换挡过程，将考虑或不考虑行走弹性时计算得到的整车加速度和瞬时冲击度的变化过程分别进行了对比，利用实车试验对单一换挡过程进行了验证；并将考虑行走弹性时升挡过程中变速箱输入输出转速变化过程、离合器滑摩功率特性的计算结果与不考虑行走弹性时换挡过程的计算结果进行了对比。研究结果表明：与不考虑行走弹性的情况相比，行走弹性变形使得换挡过程中整车加速度的变化更加平缓；换入挡离合器有两次滑摩过程，冲击度更小，换挡时间更长；离合器接合时的冲击度与其接入时间有关；滑摩功更小。